X
Type of PRESET
There are 3 categories of PRESETS:
F = Factory PRESETS factory programmed, cannot be permanently changed.
These include all the system’s usable configurations + some specific setups
for LEM enclosures.
These are the starting points for creating User PRESETS and Card PRESETS
from scratch.
U = User PRESETS can be programmed by users.
C = Card PRESETS can be programmed by users and stored on a Multimedia Memory Card.
Name of the PRESET
X
Name of the PRESET
In the example, the name indicates a two-way stereo system + two auxiliary mono outputs.
N.B.: the name of a Factory PRESET normally indicates the general structure of the sound system to be connected
to the DX 26 PLUS or of a specific speaker enclosure model.
The name of a User PRESET and a Card PRESET can be edited as required. For example: