LEM DX 26 PLUS - Ratio

39
Ratio
Allows to set the compression ratio, that is to say how the signal exceeding the trheshold has to be
reduced.
The editing values are the following: Lim. 20.0 10.0 8.0 6.0 5.0 4.0 3.5 3.0 2.5 2.0 1.7 1.5 1.3 1.1
OP1 Com
p
Lim
Fast 3.0 Off
OP1 Com
p
Lim
Fast Lim. Off
The Lim. value corresponds to the maximum compression ratio (all the signal exceeding the threshold
is cut) and in this condition the processors acts as a LIMITER.
The other values allow to reduce the signal with a ratio from 1:20.0 (high compression) to 1:1.1 (low
compression) in order to obtain different compression effects according to the kind of signal and to the
kind of application.
EDIT menu