LEM DX 26 PLUS - Variations of the Audio Parameter Editing Pages

20
Variations of the Audio Parameter editing pages
parameters
DX 26 PLUS can be configured with a large number of IN/OUT combinations.
In some configurations certain parameters aren’t used.
To streamline editing,
the system only presents the parameters that can be used on each
occasion.
For example, in the case of a 6-way configuration, input B and SUM aren’t used. The system
therefore only presents the parameters relative to Input A.
Some functions also affect the way in which parameters are edited or represented.
The Ganging function (UTILITY menu) allows to “group together” the treatment of compatible inputs
and/or outputs.
For example, it allows to equalize simultaneously and with identical values the two outputs which
feed the mid sections of a stereo sound system.
The Units option (UTILITY menu) allows to edit the values of several functions using the
measurement units preferred.
For example, it allows to edit the Delay in meters, millimeters, milliseconds or microseconds.
In these cases too, the system automatically presents the parameters in the most suitable type
of editing.
For example, in the Input Delay function
´
In
p
ut Dela
y
according to the configuration of the PRESET and according to Ganging and Units settings, the
system can have variations of this type:
IN
A
DEL
A
Y
77ms
Editing of individual inputs
IN
A
&
B DEL
A
Y
77ms
Editing of ganged inputs
IN
A
DEL
A
Y
26.5m
Measurement units preferred
Menu map