34
Xover
Low-pass and high-pass filters.
Made up of a combination of a low-pass filter and high-pass filter, the crossover allows to divide the
audio signal into segments that can be used by the individual sections of a sound system (for example
High, Mid & Low).
Xover
Each Xover has 2 slightly different pages (one for each filter), where the name of the output it affects
and the type of filter are shown.
OP1 LPF Thru
1k00Hz
Φ
O°
OP1 HPF Thru
1k00Hz
Output 1 - Low Pass Filter Output 1 - High Pass Filter
Low Pass Filter
The low-pass filter allows all the frequencies below a specific frequency to pass, whereas it cuts all the
frequencies above it.
High Pass Filter
The high-pass filter allows all the frequencies above a specific frequency to pass, whereas it cuts all the
frequencies below it.
LPF
HPF
HPFLPF
Signal segment obtained with the combination of LPF and HPF.
EDIT menu
To Next Page
Loading...
