Lenovo ThinkServer TS440 - Page 130

9.Dooneofthefollowing:
•Forthebackplaneforservermodelswith3.5-inchharddiskdrivebays,removethefourscrewsthat
securethebackplane,andthenremovethebackplanefromtheharddiskdrivecage.
Figure70.Removingthebackplaneforservermodelswith3.5-inchharddiskdrivebays
•Forthebackplaneforservermodelswith2.5-inchharddiskdrivebays,removethesixscrewsor
threescrewsthatsecurethebackplanedependingonthetypeofthebackplane.Then,remove
thebackplanefromtheharddiskdrivecage.
Figure71.Removingthebackplaneforservermodelswith2.5-inchharddiskdrivebays
10.Touchthestatic-protectivepackagethatcontainsthenewhot-swapharddiskdrivebackplanetoany
unpaintedsurfaceontheoutsideoftheserver.Then,removethenewbackplanefromthepackage.
Note:Carefullyhandlethebackplanebyitsedges.
11.Positionthenewbackplaneontheharddiskdrivecagesothatthescrewholesinthenewbackplane
arealignedwiththecorrespondingholesintheharddiskdrivecage.Then,dooneofthefollowing
dependingontheharddiskdrivecage:
118ThinkServerTS440UserGuide