Non-hot-swappowersupply
Thistopicappliesonlytoservermodelsthatcomewithanon-hot-swappowersupply.
•“Removingthenon-hot-swappowersupply”onpage85
•“Installingthenon-hot-swappowersupply”onpage86
CAUTION:
Hazardousmovingparts.Keepfingersandotherbodypartsaway.
CAUTION:
Neverremovethecoveronapowersupplyoranypartthathasthefollowinglabelattached.
Hazardousvoltage,current,andenergylevelsarepresentinsideanycomponentthathasthislabel
attached.Therearenoserviceablepartsinsidethesecomponents.Ifyoususpectaproblemwith
oneoftheseparts,contactaservicetechnician.
Removingthenon-hot-swappowersupply
Toremovethenon-hot-swappowersupply,dothefollowing:
1.Prepareyourserverandremovetheservercover.See“Preparingyourserverinadvanceandremoving
theservercover”onpage57
.
2.Disconnectcablesfromthenon-hot-swappowersupply.
Chapter5.Replacinghardware85
To Next Page
Loading...
