24 x 2.5-inch front drive bays (16SAS/SATA+8NVMe)
This section provides cable routing information for the server model with 24 x 2.5-inch front drive bays
(16SAS/SATA+8NVMe).
The server model is configured with two 8 x 2.5-inch SAS/SATA backplane (BP 1 and BP 2) and one 8 x 2.5-
inch AnyBay backplanes (BP 3). Below lists all supported configurations with these three front drive
backplanes.
Note: The AnyBay backplane (BP3) is used as a pure NVMe backplane.
Configuration
Storage controller
Qty. Type
Config. 1
2 SFF 8i RAID/HBA
Config. 2
1 SFF 16i RAID/HBA
Config. 3
1 CFF 16i RAID/HBA
Config. 4
1 SFF 32i RAID
Chapter 3. Internal cable routing 99