Internal CFF RAID/HBA/Expander adapters (power)
Use the section to understand the power cable routing for internal CFF RAID/HBA/Expander adapter.
Power cable routing for internal CFF RAID/HBA/Expander adapters
Note: The illustration only involves power cable routing. For signal cable routing, see ā2.5-inch/3.5-inch 
drive backplane (signal)ā on page 71
From To
1  Power connector on the CFF RAID/HBA adapter RAID Pwr connector on the system board
1  Power connector on the CFF RAID Expander adapter
EXP Pwr connector on the system board
Chapter 3. Internal cable routing 63