Remove the 8 x 2.5-inch rear drive cage
Use this information to remove the 8 x 2.5-inch rear drive cage.
About this task
Attention:
1. Read “Installation Guidelines” on page 129 to ensure that you work safely.
2. Power off the server and disconnect all power cords for this task.
3. Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping
static-sensitive components in their static-protective packages until installation, and handling these
devices with an electrostatic-discharge wrist strap or other grounding system.
A video for this task is available at:
• Youtube:
https://www.youtube.com/playlist?list=PLYV5R7hVcs-Bz2XIeLEfGcrLGm9TSY_yt
• Youku: http://list.youku.com/albumlist/show/id_52339612.html
334 ThinkSystem SR665 Maintenance Manual
To Next Page
Loading...
