Troubleshooting by symptom
Use this information to find solutions to problems that have identifiable symptoms.
To use the symptom-based troubleshooting information in this section, complete the following steps:
1. Check the event log of Lenovo XClarity Controller and follow the suggested actions to resolve any event
codes.
For more information about event logs, see “Event logs” on page 400)
2. Review this section to find the symptoms that you are experiencing and follow the suggested actions to
resolve the issue.
3. If the problem persists, contact support (see “Contacting Support” on page 441).
Chapter 5. Problem determination 405
To Next Page
Loading...
