Rear drive cage replacement
Use this information to remove and install the 2.5-inch or 3.5-inch rear drive cage.
• “Remove the 2 x 3.5-inch rear drive cage” on page 321
• “Install the 2 x 3.5-inch rear drive cage” on page 323
• “Remove the 4 x 3.5-inch rear drive cage” on page 325
• “Install the 4 x 3.5-inch rear drive cage” on page 327
• “Remove the 4 x 2.5-inch rear drive cage” on page 330
• “Install the 4 x 2.5-inch rear drive cage” on page 332
• “Remove the 8 x 2.5-inch rear drive cage” on page 334
• “Install the 8 x 2.5-inch rear drive cage” on page 336
• “Remove the 7mm drive cage” on page 338
• “Install the 7mm drive cage” on page 341
320
ThinkSystem SR665 Maintenance Manual
To Next Page
Loading...
