RAID super capacitor modules
Use this section to understand the cable routing for RAID super capacitor modules.
RAID super capacitor modules can be installed on the air baffle (scenario 1), the middle drive cage (scenario
2), or the front chassis (scenario 3). The following illustration shows the cable connection for scenario 1. The
cable connections for other scenarios are the similar.
Note: An extension cable is provided for each RAID super capacitor module for connection. Connect the
super capacitor cable to the super capacitor connector on the corresponding RAID adapter as shown.
Figure 17. Connecting the RAID super capacitor module to the RAID adapter
From To
RAID super capacitor module Supercap connecor on the RAID adapter
62 ThinkSystem SR665 Maintenance Manual
To Next Page
Loading...
