Lenovo ThinkSystem SR665 - Rearwall Bracket Replacement

Rearwall bracket replacement
Use this information to remove and install a rearwall bracket.
• “Remove an A1 rearwall bracket (left)” on page 308
• “Install an A1 rearwall bracket (left)” on page 310
• “Remove a B1/B2 rearwall bracket (middle)” on page 312
• “Install a B1/B2 rearwall bracket (middle)” on page 314
• “Remove a C1/C2 rearwall bracket (right)” on page 316
• “Install a C1/C2 rearwall bracket (right)” on page 318
Rearwall bracket matrix
Server model
Required rearwall brackets
Server model
with 8 PCIe
slots
The server requires 3 rearwall brackets:
A1 rearwall bracket on the left
B1 rearwall bracket on the
middle
C1 rearwall bracket on the right
Server model
with 4 x 2.5-
inch rear drives
The server requires 3 rearwall brackets:
A1 rearwall bracket on the left
B1 rearwall bracket on the
middle
C2 rearwall bracket on the right
Server model
with 2 x 3.5-
inch rear drives
The server requires 2 rearwall brackets:
306 ThinkSystem SR665 Maintenance Manual