Lenovo ThinkSystem SR665 - M.2 Drives

M.2 drives
This section provides cable routing information for the M.2 drives.
M.2 drives can be installed on the standard air baffle (scenario 1), GPU air baffle (scenario 2), 2.5-inch middle
drive cage (scenario 3), or 3.5-inch middle drive cage (scenario 4). The following illustration shows the cable
connection for scenario 1. The cable connections for other scenarios are the same.
Figure 19. Cable routing for M.2 drives
From To
1 M.2 signal cable
• PCIe connector 4 on the system board (two
processors installed)
• PCIe connector 1 on the system board (one processor
installed)
2 Power cable M.2 power connector on the system board
Chapter 3. Internal cable routing 65