• For a single-wide GPU adapter (for example, NVIDIA T4 GPU), install the add-on air baffle onto
the GPU air baffle.
Figure 61. Installing the add-on air baffle for a single-wide GPU adapter
Step 2. Locate the appropriate PCIe slot for the GPU adapter.
Step 3. Align the GPU adapter with the PCIe slot on the riser card. Then, carefully press the GPU adapter
straight into the slot until it is securely seated.
Step 4. Connect the power cable to the power connector on the GPU.
Step 5. Install the riser assembly. See “Install a PCIe adapter and riser 1/2 assembly” on page 350 and
“Install a PCIe adapter and riser 3 assembly” on page 359.
After you finish
Complete the parts replacement. See “Complete the parts replacement” on page 397.
174
ThinkSystem SR665 Maintenance Manual
To Next Page
Loading...
