Procedure
Step 1. Locate the correct keyhole that the retainer should be installed into to accommodate the particular
size of the M.2 drive you wish to install.
Step 2. Adjust the M.2 retainer.
Figure 95. M.2 retainer adjustment
a. Press both sides of the retainer.
b. Move the retainer forward until it is in the large opening of the keyhole.
c. Take the retainer out of the keyhole.
d. Insert the retainer into the correct keyhole.
e. Press both sides of the retainer.
f. Slide the retainer backwards (toward the small opening of the keyhole) until it is seated in
place.
238
ThinkSystem SR665 Maintenance Manual
To Next Page
Loading...
