Procedure
Step 1. Remove the top cover. See “Remove the top cover” on page 392.
Step 2. Disconnect the cable of the RAID super capacitor module.
Step 3. Remove the super capacitor module from the air baffle.
Figure 131. Super capacitor module removal
a. Open the retention clip on the holder of the super capacitor module.
b. Take the super capacitor module out of the holder.
After you finish
If you are instructed to return the old RAID super capacitor module, follow all packaging instructions and use
any packaging materials that are provided.
292
ThinkSystem SR665 Maintenance Manual
To Next Page
Loading...
