Procedure
Step 1. Remove the top cover. See “Remove the top cover” on page 392.
Step 2. Disconnect the cable of the RAID super capacitor module.
Step 3. Open the drive cage handle.
Figure 133. Opening the handle of the middle drive cage
Step 4. Remove the super capacitor module.
Figure 134. Removing the super capacitor module
1. Pull out the blue latch on the super capacitor cover.
2. Slide the cover out of the holder.
3. Take the super capacitor module out of the holder.
After you finish
If you are instructed to return the old RAID super capacitor module, follow all packaging instructions and use
any packaging materials that are provided.
296
ThinkSystem SR665 Maintenance Manual
To Next Page
Loading...
