Procedure
Step 1. Prepare your server.
a. Remove the top cover. See “Remove the top cover” on page 392.
b. If you are replacing the system fan cage, remove all system fans first. See “Remove a system
fan” on page 381.
c. If you are removing the system fan cage to access other components, you can remove it with
the system fans installed.
Step 2. Remove the system fan cage.
Figure 185. System fan cage removal
a. Rotate the levers of the system fan cage to the rear of the server.
b. Lift the system fan cage straight up and out of the chassis.
388
ThinkSystem SR665 Maintenance Manual