Server models with four 2.5-inch rear drive bays and six PCIe slots
Table 14. Components on the rear of the server
Callout Callout
1 PCIe slot 1 (on riser 1 assembly) 2 PCIe slot 2 (on riser 1 assembly)
3 PCIe slot 3 (on riser 1 assembly) 4 PCIe slot 4 (on riser 2 assembly)
5 PCIe slot 5 (on riser 2 assembly) 6 PCIe slot 6 (on riser 2 assembly)
7 2.5-inch rear drive bays (4)
8 Power supply 1
9 Power supply 2 (optional)
10 NMI button
11 USB 3.1 Gen 1 connector 12 VGA connector
13 USB 3.1 Gen 1 connectors (2) 14 XClarity Controller Network connector
15 Ethernet connectors on OCP 3.0 Ethernet adapter
(optional, two or four connectors may be available)
Note: For more information about each component, see “Rear components overview” on page 39.
Chapter 2. Server components 35
To Next Page
Loading...
