Lenze 8400 BaseLine C - Save Parameter Settings Safe against Mains Failure

Lenze · 8400 BaseLine C · Reference manual · DMS 1.6 EN · 01/2014 · TD05 29
3 Commissioning
3.3 Commissioning with integrated keypad
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
3.3.3 Save parameter settings safe against mains failure
If parameter settings are changed in the controller, those changes will be lost after mains switching
of the controller unless the settings have been saved explicitly.
• Keep the entry button pressed for 3 seconds in order to save
the parameter settings safe against mains failure.
 Tip!
In C141
, an automatic saving can be activated.
Automatic saving of parameter changes
( 49)
B
ESC
C
D
E
F
A
8888
3 sec
SAVE