Lenze E82EV752K4C - Page 264

Parameter setting with the E82ZBC keypad
Activation of password protection
9
Parameter setting
9.3
9.3.6
L
9.3-8
EDS82EV903-1.0-11/2002
9.3.6 Activation of password protection
(Available as of version E82 ... Vx11 together with the keypad, version E82B ...
Vx10)
)
))
) Note!
If the password protection is activated (C0094 = 1 ... 9999) only
the user menuuser can be freely accessed.
l All other functions can only be carried out, if you enter the
password before.
Please note:
l During the parameter set transfer you also overwrite the
parameters that are password-protected.
l The password will not be transferred.
Do not forget your password! If you cannot remember the
password, it can only be reset via PC or a bus system.
Step Keys Result Action
1. Change to the menu
a
l
l
t
 Change to function bar 2
2.
g
all
wx o
3.
yz all
Select menu all (list of all codes)
4.
t
 Confirm selection and change to function bar 1
5. Enter password
x f
6.
p
z 0094
Password code
7.
x i
8.
z XXXX
Set password
9.
v STOre
Confirm password
10. Activate password
t
 Change to function bar 2
11.
p
by changing to the
m
e
n
u
s
e
r
wx o
12.
menu user
yz user
Select menu user
13.
t
 Confirm selection and change to function bar 1
q
The key symbol indicates that the password protection is
active
The password protection is active now:
• Every time you want to leave the user menu, the following will be displayed: pass.
• If you enter the correct password and confirm with v all function are freely accessible again.
Activation of password
protection
Show/Hide Bookmarks