Lenze i550

4 PROFINET
Configuration and identification (I&M)
Lenze · Inverter i550 - Cabinet · Ethernet Manual · 0.1 EN · 12/2015 11
Supervisor Access

Second controller AR
Yes (initial revision of i550 does not support a second ctrl AR)
Fast Startup
No. (Typical startup time appx. 11 sec.)
Topology support
LLDP, MIB , Station Alias
PN Blink function

Alarm Type
User
Acyclic Services

Additional Ethernet Channel
TCP/IP Channel
Lenze GCI Support

Lenze ESDCP Support

Power over Ethernet PoE
-
External 24V Power Supply
Yes (Supply the Control Unit over X3 24E/GND Pins)
Optical Fiber support
-
4.1.3 Device Description File GSDML
The device description file GSDML can be found in the Lenze download area.
4.2 Configuration and identification (I&M)
P508:0
0x2380:0
Activate network (*)
i550
R/W
0: No action/no error
1: Restart with actual values
2: Restart with default values
5: Stop network communication
10: In progress
11: Action cancelled
12: Fault
Controls network activities.
P510:1
0x2381:1
IP address (*)
i550
R/W
-- ... [0.0.0.0] ... --
Defines the IP address of the I/O device.
P510:2
0x2381:2
Subnet (*)
i550
R/W
-- ... [0.0.0.0] ... --
Defines the subnet mask of the I/O device.
P510:3
0x2381:3
Gateway (*)
i550
R/W
-- ... [0.0.0.0] ... --
Defines the gateway address of the I/O device.
P510:4
0x2381:4
Station name (*)
i550
R/W
-- ... [--] ... --
Defines the station name of the I/O device.
P
0x2381:5
I&M1 System designation (*)
i550
R/W
-- ... [--] ... --
Defines the I&M1 System designation of the I/O device.
P
0x2381:6
I&M1 Installation site (*)
i550
R/W
-- ... [--] ... --
Defines the I&M1 Installation site of the I/O device.