18 Using the numeric keypad, enter your fax number.
19 Press .
20 Using the keypad, enter a fax name.
21 Press .
Note: Initial Setup Complete appears on the display. You will be prompted to load paper into the paper
support and press
to print an alignment page.
Related topics:
• “Using the control panel” on page 95
Removing and reinstalling the software
If the printer is not functioning properly, or if a communications error message appears when you try to use the
printer, you may need to remove and reinstall the printer software.
1 Close all open software applications.
2 From the Finder desktop, double-click the Lexmark 5000 Series folder.
3 Double-click the Uninstaller icon.
4 Follow the instructions on the computer screen to remove the printer software.
5 Restart the computer before reinstalling the printer software.
6 Insert the CD, and then follow the instructions on the computer screen to reinstall the software.
Related topics:
• “Installing print cartridges” on page 115
Troubleshooting
171
To Next Page
Loading...
