17 Press or repeatedly until Device Setup appears.
18 Press .
19 Press or repeatedly until Date/Time appears.
20 Press .
21 Enter the date using the keypad.
22 Press .
23 Enter the time using the keypad.
24 Press .
25 If the hour you entered is 12 or less, press or repeatedly until AM, PM, or 24hr appears.
26 Press to save the setting.
Related topics:
• “Using the control panel” on page 95
Setting up a fax footer using the control panel
1 From the control panel, press Fax Mode.
2 Press .
3 Press or repeatedly until Fax Setup appears.
4 Press .
5 Press or repeatedly until Fax Printing appears.
6 Press .
7 Press or repeatedly until Fax Footer appears.
8 Press .
9 Press or repeatedly until On appears.
10 Press .
11 During the initial setup of your printer, you were prompted to enter the date and time. If you have not entered
this information:
a Press Settings.
b Press .
c Press or repeatedly until Device Setup appears.
d Press .
e Press or repeatedly until Date/Time appears.
f Press .
g Enter the date using the keypad.
h Press .
i Enter the time using the keypad.
Faxing using the control panel
28
To Next Page
Loading...
