Lexmark 5000 Series - Canceling a Copy after Document Is Loaded

1 Load paper.
2 Load an original document facedown in the Automatic Document Feeder (ADF).
3 From the control panel, press Copy Mode.
4 Press .
5 Press or repeatedly until Collate appears.
6 Press .
7 Press or repeatedly until On appears.
Note: You can collate copies only if you did not make any changes in the Resize menu.
8 Press Start Color or Start Black.
Related topics:
• “Making a copy” on page 60
• “Collating copies using the computer” on page 49
• “Using the control panel” on page 95
Canceling a copy after document is loaded
If you have loaded a document into the Automatic Document Feeder (ADF) and the printer roller has started pulling
it into the printer, but you have not yet initiated your copy job:
1 Pull the control panel up.
2 Gently lift your original document out of the ADF.
3 Push the control panel down until it snaps into place.
Related topics:
• “Using the control panel” on page 95
Copying
63