Lexmark 5000 Series - Blocking Unwanted Changes to Fax Settings Using the Control Panel; Blocking Junk Faxes Using the Control Panel

7 Press or repeatedly until the type of report you want to print appears.
8 Press .
9 Press or repeatedly until the setting you want appears.
10 Press to print the report.
Related topics:
• “Using the control panel” on page 95
Blocking unwanted changes to fax settings using the control panel
This feature blocks network users from changing fax settings.
1 From the control panel, press Settings.
2 Press or repeatedly until Device Setup appears.
3 Press .
4 Press or until Host Fax Settings appears.
5 Press .
6 Press or until Block appears.
7 Press to save this setting.
Blocking junk faxes using the control panel
If you have Caller ID, you can block faxes sent from specific numbers and/or all faxes which do not include a Caller
ID number.
1 From the control panel, press Fax Mode.
2 Press .
3 Press or repeatedly until Fax Setup appears.
4 Press .
5 Press or repeatedly until Fax Blocking appears.
6 Press .
7 Press or repeatedly until Turn On/Off appears.
8 Press .
9 Press or repeatedly until On appears.
10 Press .
11 If you want to block faxes from specific phone numbers:
a Press or repeatedly until Add appears.
b Press .
c Enter a fax number of up to 64 characters. Characters can include numbers and the symbols * and #.
d Press .
Faxing using the control panel
31