Loading banner paper
You can load up to 20 sheets of banner paper at a time.
1 Remove all paper from the paper support before loading the banner paper.
2 Tear off only the number of pages needed to print the banner.
3 Place the required stack of banner paper behind the printer.
4 Feed the leading edge of the banner paper into the printer first.
5 Make sure:
• The paper is loaded in the center of the paper support.
• The paper guides rest against the edges of the paper.
Loading original documents into the Automatic Document Feeder (ADF)
You can load up to 30 sheets of an original document into the Automatic Document Feeder (ADF) for scanning,
copying, and faxing.
1 Load an original document facedown into the ADF.
2 Adjust the paper guides on the ADF to rest against the edges of the paper.
Printing
46
To Next Page
Loading...
