Understanding printer messages
179
Understanding printer messages
Restoring Held Job
xxx/yyy
The printer is restoring held jobs
from the hard disk.
xxx represents the number of the
job being restored. yyy represents
the total number of jobs to be
restored.
• Wait for the message to clear.
• Select the Abort Restore menu item in
the Job Menu.
See also: Using the Print and Hold
function
Serial <x> A serial interface is the active
communication link.
Wait for the message to clear.
Supplies At least one of the printer supplies
requires attention. For example, you
may have a toner cartridge that is
low on toner.
Press Menu to open the Supplies Menu
and identify which supply item needs
replacing. Replace the appropriate
printer supplies.
TMA Toner Mass Adjustment
The printer is performing a toner
mass adjustment.
This is a secondary message that is
displayed on the second line of the
operator panel when the Engine
Warming and Performing Self
Test messages appear.
Wait for the message to clear.
USB The printer is processing data
through the specified USB port.
Wait for the message to clear.
USB <x>
Waiting The printer has received a page of
data to print but is waiting for an End
of Job command, a Form Feed
command, or additional data.
• Press Go to print the contents of the
buffer.
• Press Menu to open the Job Menu
and cancel the current job.
See also: Canceling a print job
1565 Emul Error Load
Emul Option
The download emulator version on
the firmware card does not match
the printer code version.
This error can occur if you update
printer firmware or move a firmware
card from one printer to another.
The printer automatically clears the
message in 30 seconds, and then
disables the download emulator on the
firmware card.
Download the correct download
emulator version from the Lexmark Web
site.
2<xx> Paper Jam The printer detects a jam. Clear the media path of all jams.
See also: Identifying the media path
30 <color> Toner Cart
Missing
The specified toner cartridge is
either missing or incorrectly
installed.
Insert the toner cartridge completely into
the printer. The printer automatically
clears the message.
See also: Replacing the toner
cartridges
Message What this message means What you can do