Lexmark C510 - Page 181

Understanding printer messages
181
Understanding printer messages
37 Insufficient
Defrag Memory
The printer cannot defragment flash
memory, because the printer
memory used to store undeleted
flash resources is full.
• Delete fonts, macros, and other data
in printer memory.
• Install additional printer memory.
37 Insufficient
Memory
The printer memory is full and
cannot continue processing current
print jobs.
• Press Go to clear the message and
continue the current print job. The
printer frees memory by deleting the
oldest held job and continues deleting
held jobs until there is enough printer
memory to process the job.
• Press Stop to clear the message
without deleting any held jobs. The
current job may not print correctly.
• Press Menu to open the Job Menu
and cancel the current job.
• To avoid this error in the future:
– Delete fonts, macros, and other
data in printer memory.
– Install additional printer memory.
Note: The messages 37
Insufficient Memory and Held Jobs
may be lost alternate on the display.
See also: Using the Print and Hold
function; Held Jobs May Be Lost;
Held Jobs May Not Be Restored
38 Memory Full The printer is processing data, but
the memory used to store pages is
full.
• Press Go to clear the message and
continue printing the job. The job may
not print correctly.
• Press Menu to open the Job Menu
and cancel the current job.
• To avoid this error in the future:
– Simplify the print job by reducing
the amount of text or graphics on a
page and deleting unnecessary
downloaded fonts or macros.
– Install additional printer memory.
See also: Canceling a print job
Message What this message means What you can do