Lexmark C510 - Page 184

Understanding printer messages
184
Understanding printer messages
58 Too Many Flash
Options
Too many flash memory options are
installed on the printer.
Turn off and unplug the printer. Remove
the excess flash memory. Plug in the
printer and turn it on.
See also: Removing optional cards
61 Defective Disk The printer detects a defective hard
disk.
• Press Go to clear the message and
continue printing.
• Install a different hard disk before you
perform any operations that require
one.
See also: Setup Guide
62 Disk Full There is not enough memory on the
hard disk to store the data sent to
the printer.
• Press Go to clear the message and
continue processing. Any information
not previously stored on the hard disk
is deleted.
• Delete fonts, macros, and other data
stored on the hard disk.
63 Unformatted Disk The printer detects an unformatted
hard disk.
• Press Go to clear the message and
continue printing.
• Format the disk before performing any
disk operations. To format the disk,
select Format Disk from the Utilities
Menu.
• If the error message remains, the
hard disk may be defective and
require replacing. Install a new hard
disk and format it.
See also: Format Disk
64 Unsupported Disk
Format
The printer detects an unsupported
disk format.
• Press Go to clear the message.
• Format the disk.
Note: Disk operations are not allowed
until the disk is formatted.
82 Waste Bottle Nearly
Full
The toner waste bottle is almost full. • Press Go to clear the message and
continue printing.
• Replace the waste toner bottle.
See also: 82 Waste Toner Bottle
Full or Missing; Replacing the
waste toner bottle
82 Waste Toner Bottle
Full or Missing
The waste toner bottle is full or
missing.
Replace the waste toner bottle and
press Go to clear the message.
See also: Replacing the waste toner
bottle
83 Photodev Cart
Exhausted
The photodeveloper cartridge is
completely used.
Replace the photodeveloper cartridge.
See also: Replacing the
photodeveloper cartridge
Message What this message means What you can do