EasyManuals Logo
Home>Lexmark>Printer>E352DN

Lexmark E352DN Service Manual

Lexmark E352DN
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #35 background imageLoading...
Page #35 background image
Diagnostics information 2-13
4512-420, -430
924.02 Open thermistor check failure. The ADC failed to converge. Possible noisy thermistor signal. This applies to the
fuser and belt fusers.
Fan service errors
927.00 Service fan error
927.03 Main fan took too long to ramp up
927.04 Main fan is under speed or stalled during speed adjustment state
927.05 Main fan overspeed during speed adjustment state.
927.06 Main fan capture data is invalid and speed control is at maximum in fan control idle state
927.07 Main fan capture data is invalid and speed control is at maximum in fan control adjustment state.
Printhead service errors
931.00 No first hsync
931.01 No first hsync
932.00 Lost hsyncs
932.01 Lost hsyncs
933.00 Printhead boost signal failure
935.10 Printhead sweep error, swept through Hz range without finding the resonant frequency
935.11 Printhead sweep error, autosweep hw state
935.12 Printhead sweep error, coarse sweep state
935.13 Printhead sweep error, init fine sweep state
935.14 Printhead sweep error, fine sweep state
935.15 Printhead sweep error, check prelim amp state
935.16 Printhead sweep error, enable amp Kp state
935.17 Printhead sweep error, amp Kp failed to converge
935.18 Printhead sweep error, enable amp Ki state
935.19 Printhead sweep error, amp Ki failed to converge
935.20 Printhead sweep error, enable offset controller state
935.21 Printhead sweep error, load scan regs state
935.22 Printhead sweep error, fwd and rev capture times differ by too much
935.23 Printhead sweep error, check sweep accuracy state
935.24 Printhead sweep error, reserved
935.25 Printhead sweep error, detected resonant frequency out of expected range
935.26 Printhead sweep error, timed out waiting for end of sweep
Transport motor service errors
Service error codes (9xx) (Continued)
Error Description

Table of Contents

Other manuals for Lexmark E352DN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark E352DN and is the answer not in the manual?

Lexmark E352DN Specifications

General IconGeneral
ColorNo
Duplex printingYes
Print technologyLaser
Maximum resolution2400 x 2400 DPI
Time to first page (black, normal)6.5 s
Print speed (black, normal quality, A4/US Letter)33 ppm
Internal memory32 MB
Maximum internal memory160 MB
Sound pressure level (printing)52 dB
Total input capacity250 sheets
Maximum input capacity800 sheets
Envelopes sizes7 3/4, 9, 10, B5, C5, DL
Maximum print size210 x 297 mm
Media weight (tray 1)80 gsm
Paper tray media typesEnvelopes, Labels, Plain paper
Non-ISO print media sizesExecutive (184 x 267mm), Folio (media size), Letter (media size), Statement (140 x 216mm), Legal (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
Maximum ISO A-series paper sizeA4
Supported network protocols (IPv4)TCP/IP IPv4, AppleTalk, TCP/IP IPv6
Compatible operating systemsMac OS X Mac OS 9.x Citrix MetaFrame Linux Microsoft Windows 2000, NT, Me, XP, Server 2003, 98, Vista Novell UNIX
Maximum duty cycle80000 pages per month
Sustainability certificatesENERGY STAR
Operating altitude0 - 2500 m
Operating temperature (T-T)16 - 32 °C
Operating relative humidity (H-H)8 - 80 %
CertificationFCC Class B, UL 60950-1, U.S. FDA, IEC 320-1, CSA, ICES Class B, CE Class B, CB IEC 60950-1, IEC 60825-1, GS (TÜV), SEMKO, UL AR, CS, TÜV Rh, N Mark, ACA C-tick Class B, CCC Class B, BSMI Class B, MIC, EK Mark, PSB
Weight and Dimensions IconWeight and Dimensions
Dimensions (WxDxH)396 x 359 x 259.5 mm

Related product manuals