3-16 Lexmark™ E350d, E352dn
4512-420, -430
Duplex tests
• Quick Test
• Top Margin
• Left Margin
• Sensor Test
• Duplex Feed 1
These tests are used to determine if the duplex is working correctly.
Quick Test
The Quick Test contains the following information on a duplexed page:
• Print registration settings
• Alignment diamonds at the top and bottom
• Horizontal lines to check for skew
• General printer information, including current page count, installed memory, serial number,
and code level.
To print the duplexed Quick Test page:
1. Select Quick Test from the DUPLEX TESTS menu.
2. Select Single or Continuous by using .
3. Press to print the page.
Top Margin
1.
Select Top Margin from the DUPLEX TESTS menu.
2. To change the margin value, press to increase the value or to decrease the value.
3. Press to save the desired margin value.
Left Margin
1.
Select Left Margin from the DUPLEX TESTS menu.
2. To change the margin value, press to decrease the value or to increase the value.
3. Press to save the desired margin value.
Sensor Test
This test is used to determine if the input sensor is operating correctly.
• If the sensor is operating correctly, OP (Open) will appear on the display:
• Press Back to return to the DUPLEX TESTS menu.
Sensor Test
Input=OP