3-2 Lexmark™ E360d, E360dn
4513-420, -430
Configuration menu (CONFIG MENU)
Entering Configuration Menu
1. Turn off the printer.
2. Press and hold and .
3. Turn on the printer.
4. Release the buttons when Performing Self Test displays.
Available menus
The menus display on the operator panel in the order shown:
Configuration menu settings
Note: Menus may vary depending on the features and options of the printer.
Reset PC Cnt See “Reset photoconductor maintenance counter (Reset PC
Cnt)” on page 3-3.
Prt Quality Pgs See “Print quality pages (Prt Quality Pgs)” on page 3-3.
Reports
• Menu Settings Page
• Event Log
See “Reports” on page 3-3.
Panel Menus See “Panel Menus” on page 3-3.
PPDS Emulation See “PPDS Emulation” on page 3-3.
Demo Mode See “Demo Mode” on page 3-4.
Factory Default See “Factory Defaults” on page 3-4.
Energy Conserve See “Energy Conserve” on page 3-4.
Font Sharpening See “Font Sharpening” on page 3-4.
Exit Configuration Menu See “Exit Configuration Menu (Exit Config Menu)” on page 3-4.
To Next Page
Loading...
