EasyManuals Logo

Lexmark MS517dn User Manual

Lexmark MS517dn
400 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #180 background imageLoading...
Page #180 background image
To run the Duplex quick test:
1 From the Diagnostics menu, navigate to:
Duplex Tests > Quick Test
2 Choose any of the following:
Single—Prints a single Quick test page.
Continuous—Continuously prints the Quick test pages until X is pressed.
The printer attempts to print the Quick test page from the default paper source. If the default paper source
supports only envelopes, then the page is printed from Tray 1.
The Quick test page contains the following information:
Printer registration settings
Code levels
Alignment diamonds at the top, bottom, and each side
Horizontal lines for skew adjustment
General printer information, including current page count, installed memory, processor speed, serial
number, engine ID, and controller board ID
3 Check the Quick test page for the correct oset between the placement of the first scan line on the front
and back side of a duplexed sheet.
4 If adjustment is necessary, the top margin in the Registration menu must be adjusted first. The duplex top
margin
oset
may be adjusted next. A positive
oset
moves the text down the page and widens the top
margin, while a negative oset moves the text up the page and narrows the top margin.
Top Margin
This setting controls the
oset
between the placement of the
first
scan line on the front and back side of a
duplex sheet.
Note: If adjustment is necessary, the top margin in the Registration menu must be adjusted first. The duplex
top margin may be adjusted next.
To adjust this setting:
1 From the Diagnostics menu, navigate to:
Duplex tests > Top Margin
2 Change the margin values.
Changing the value by 1 unit moves the margin by 1/100 in. A positive value moves the text down the page
and widens the top margin. A negative value moves the text up the page and narrows the top margin.
3 Depending on the printer model, press OK or touch to save the desired margin value.
Left Margin
This setting allows the user to shift the position of the left margin of the back side of a duplexed page to the
left or right. The default margin is 1/4 in.
4514-6xx
Service menus
180

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lexmark MS517dn and is the answer not in the manual?

Lexmark MS517dn Specifications

General IconGeneral
Cables includedAC
Cartridge(s) includedYes
Included cartridge capacity (black)3000 pages
ColorNo
Print technologyLaser
Time to first page (black, normal)6.5 s
Print speed (black, normal quality, A4/US Letter)42 ppm
Duplex print speed (black, normal quality, A4/US Letter)18 ppm
Processor cores2
Noise level (idle)15 dB
Processor frequency800 MHz
Maximum internal memory1280 MB
Sound pressure level (printing)55 dB
Sound pressure level (duplex printing)54 dB
Envelopes sizes7 3/4, 9, 10, DL
Paper tray media typesCard stock, Envelopes, Labels, Plain paper, Transparencies
Paper tray media weight60 - 120 g/m²
Non-ISO print media sizesExecutive (184 x 267mm), Folio (media size), Letter (media size), Oficio (media size), Statement (140 x 216mm), Universal, Legal (media size)
ISO A-series sizes (A0...A9)A4, A5, A6
JIS B-series sizes (B0...B9)B5
Maximum ISO A-series paper sizeA4
Multi-Purpose Tray media weight60 - 163 g/m²
Total input capacity350 sheets
Total output capacity150 sheets
Maximum input capacity2000 sheets
Maximum number of input trays5
Multi-Purpose tray input capacity100 sheets
USB connectorUSB Type-B
Standard interfacesEthernet, USB 2.0
Optional connectivityWireless LAN
USB 2.0 ports quantity1
Wi-Fi-
Cabling technology10/100/1000Base-T(X)
Security algorithmsLEAP, MD5, MSCHAPv2, PEAP, SNMPv3, SSL/TLS, TTLS
Ethernet LAN data rates10, 100, 1000 Mbit/s
Supported network protocols (IPv4)TCP/IP IPv4, AppleTalk
Supported network protocols (IPv6)TCP/IP IPv6, TCP, UDP
Package depth472 mm
Package width432 mm
Package height380 mm
Package weight16700 g
Power consumption (off)0.5 W
Power consumption (ready)7 W
Power consumption (printing)600 W
Energy Star Typical Electricity Consumption (TEC)2.1 kWh/week
DisplayLCD
CertificationENERGY STAR, Blue Angel RAL-UZ-171, ICES-003 Class B, BSMI Class B, VCCI Class B, US FDA, UL 60950-1, FCC Class B, cUL CAN/CSA-C22.2 60950-1, NOM, CB EN/IEC 60950-1, CB EN/IEC 60825-1, CE DoC (EN 62301 Class B, EN 62311, CE EN/IEC 60950-1, CE EN/IEC 60825-1, EN 61000-3, EN 55022 Class B, EuP, EN 55024, UL), EFTA (CE), KCC, CCC, CECP, CEL, C-tick DoC, UL-AR, KC mark, UL GS mark, EC 1275, MET-I, ISO 532B, ECMA-370, TED, GOST-R, SII, TER
Product colorGray
Display diagonal2.4 \
Printing colorsBlack
Country of originChina
Maximum duty cycle120000 pages per month
Recommended duty cycle1500 - 14000 pages per month
Page description languagesMicrosoft XPS, PCL 5e, PCL 6, PDF 1.7, PPDS, PostScript 3
Sustainability certificatesBlue Angel, ENERGY STAR
Operating altitude0 - 2896 m
Operating temperature (T-T)16 - 32 °C
Operating relative humidity (H-H)8 - 80 %
Authentication method802.1x
Weight and Dimensions IconWeight and Dimensions
Depth382 mm
Width399 mm
Height263 mm

Related product manuals