EasyManua.ls Logo

Lexmark MX61 SERIES - Page 27

Lexmark MX61 SERIES
527 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
April 6, 2015
• 40X8086 FRU was renamed to ‘550‑sheet tray insert’
• 40X8261 FRU was renamed to ‘ACM assembly (standard tray only)’
• 40X8262 FRU was renamed to ‘ACM assembly (option tray only)’
February 5, 2015
• Part number 41X0259 (Narrow media sensor) was added to the parts catalog.
October 10, 2014
• Updated the illustration of Electronics 2 parts catalog assembly to show the correct toner cartridge smart
chip contact.
September 22, 2014
• Part number 40X8274 was replaced with 40X9181.
August 15, 2014
Updated the following service checks:
• Toner cartridge smart chip contact service check
• Cartridge gearbox service check
• Toner starvation service check
• LSU service check
• Tray 1 jam service check
August 7, 2014
• Scanner carriage failure service check was added to address the 843.00 error.
July 2, 2014
• Art revised for Frame parts catalog: spring (40X8295) and cable (40X8083) are no longer included.
June 23, 2014
• Parts catalog—Art was revised for Assembly 1: Covers.
June 11, 2014
• Parts catalog—Added Latin America power supply part number 41X0003.
May 23, 2014
• Added part number 40X0289 to the power cords parts catalog assembly.
April 1, 2014
• Note for updating the scanner firmware was added to the ADF paper jam service check.
March 3, 2014
• Added the Restoring solutions, licenses, and configuration settings topic under Removal precautions.
• Updated the Restoring the printer configuration after replacing the controller board topic.
7016
Preface
27

Table of Contents