Jam access area Printer control panel message What to do
9 Finisher output bin [x]-page jam, remove all pages
from the output bin. Leave paper
in bin [45y.xx]
• Move the left tamper arm to the left and the right
tamper arm to the right, and then remove the
jammed paper from the finisher bin.
• Open the finisher rear door and the trap door, and
then remove any jammed pages.
[x]‑page jam, clear standard bin. [20y.xx]
1 Firmly grasp the jammed paper on each side, and then gently pull it out.
Note: Make sure all paper fragments are removed.
2 From the printer control panel, touch Done to clear the message and continue printing.
[x]‑page jam, open front door. [20y.xx]
CAUTION—HOT SURFACE: The inside of the printer might be hot. To reduce the risk of injury from a hot
component, allow the surface to cool before touching it.
1 Press the button on the right side of the printer, and then open the front door.
7016
Diagnostic information
55
To Next Page
Loading...
