45y paper jams
451 paper jam messages
Error code Description Action
451.01 Media remains detected by the sensor (stapler
pass through) after power on.
See
“Finisher jam service check” on
page 103.
451.03 The media fed did not reach the sensor (stapler
pass through).
451.05 While feeding, the media remains detected by the
sensor (stapler pass through).
451.09 Page In Output is never received from the staple
finisher.
451.10 Invalid Page ID returned by the staple finisher.
451.41 Staple finisher main motor stalled.
451.42 Staple finisher main motor did not reach the
required speed.
451.43 Staple finisher took too long to ramp up the stapler
main motor.
452–453 paper jam messages
Error code Description Action
452.73 Staple finisher left tamper failed to leave its home
position.
See
“Stapler left tamper jam service check” on
page 105.
452.74 Staple finisher left tamper failed to reach its home
position.
453.75 Staple finisher right tamper failed to leave its
home position.
453.76 Staple finisher right tamper failed to reach its
home position.
7016
Diagnostic information
100
To Next Page
Loading...
