121
9 Carefully tighten the green thumbscrews.
WARNING: Overtightening the screws can strip the threads.
10 Close the printer front door (Door F).
11 Close the printer side door (Door A).
12 If the duplex unit is attached to the printer, close the duplex unit door (Door E).
13 Reinstall the envelope feeder if it was removed. See Reinstalling the envelope feeder.
14 If you have already replaced all the items listed in the following note, you may turn the printer
on.
Note: Make sure you also follow the instructions in Replacing the transfer roller,
Replacing pick rollers, Cleaning the wiper blade,andResetting the
maintenance page counter.
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
