Lexmark W820 - Removing an Optional Firmware Card

176
6 Place the card in its original packaging, or wrap the card in paper and store it in a box.
7 Reinstall the system board. See Reinstalling the printer system board.
Removing an optional firmware card
WARNING: Optional firmware cards are easily damaged by static electricity. Touch something
metal on the printer before you touch an optional firmware card.
1 Access the printer system board. See Accessing the printer system board.
2 Grasp the firmware card gently and pull it straight up in one action. Do not pull one side and
then the other.
3 Reinstall the system board. See Reinstalling the printer system board.
Downloaded From ManualsPrinter.com Manuals