Lexmark W820 - Page 23

21
The printer has three standard print media sources: trays 1 and 2, each of which hold 500 sheets of 20
lb paper; and the multipurpose feeder, which holds approximately 35 sheets of 20 lb paper. You can
also attach an optional high capacity feeder, which contains three trays. With all trays attached, you
can have a maximum input supply of 3,500 sheets of paper. The following table details the types, sizes,
and quantities of print media you can load in each of the sources.
Print media source, size, and capacity specifications
Source
Print media
supported
Sizes supported Capacity
Tray 1 (standard) Paper,
transparencies,
labels, card stock
A3, A4, A5, Folio, JIS B4
†
,
JIS B5
†
,Executive
†
, Letter,
Legal
†
, Statement, 11x17
• 500 sheets of 20 lb paper
• 250 sheets of labels
• 300 transparencies
• 250 sheets of card stock
Tray 2 (standard) Paper, labels,
card stock
A3, A4, Folio, JIS B4
†
,JIS
B5
†
,Executive
†
, Letter,
Legal
†
, 11x17
• 500 sheets of 20 lb paper
• 250 sheets of labels
• 250 sheets of card stock
Tray 3 (optional)
*
Paper, labels,
card stock
A3, A4, Folio, JIS B4
†
,JIS
B5
†
,Executive
†
, Letter,
Legal
†
, 11x17
*
Trays 3, 4, and 5 comprise the optional high capacity feeder.
†
Executive and Legal are supported under factory default conditions. For JIS B4 or JIS B5, see Sensing special
print media sizes.
‡
The multipurpose feeder does not support auto size sensing. Print media sizes must be selected from the
printer operator panel.
Downloaded From ManualsPrinter.com Manuals