Lexmark W820 - Page 234

232
Staple Alarm
Purpose:
To specify how the printer responds when it is out of staples.
Values:
See also:
Auto Continue; Configuring printer alerts
Toner Alarm
Purpose:
To specify how the printer responds when it is out of toner.
Values:
See also:
Auto Continue; Configuring printer alerts
Off* When Off is selected, the printer does not stop printing, just stapling. The operator
panel displays Staples Empty.
Single Printer stops printing, displays Load Staples, and sounds three quick beeps.
Continuous Printer stops printing, displays Load Staples, and repeats three beeps every 10
seconds until the staple cartridge is replaced.
Off* When Off is selected, the printer does not stop printing. The Toner Low message
appears.
Single Printer stops printing, displays an error message (88 Toner Low), and sounds
three quick beeps.
Continuous Printer stops printing, displays an error message, and repeats three beeps every
10 seconds until the toner cartridge is replaced.
Downloaded From ManualsPrinter.com Manuals