288
Performing
Self Test
What this message means:
The printer is running the series of start-up tests it performs after it is turned on.
What you can do:
Wait for the message to clear.
Power Saver
What this message means:
The printer is ready to receive and process data. It is reducing its electricity consumption while
idle. If the printer remains inactive for the period of time specified in the Power Saver menu
item, the Power Saver message replaces the Ready message.
What you can do:
•
Send a job to print.
• Press Go to quickly warm the printer to normal operating temperature and display the Ready
message.
Priming Failed,
Retry
What this message means:
The printer failed to prepare the stapler to staple print jobs.
What you can do:
•
Press Go to try priming the stapler again.
• Make sure staples are loaded and there is no jam in the stapler.
• Make sure paper is loaded in the tray specified in the Staple Prime Source menu item.
• Press Return or Stop to cancel priming.
See also:
Priming the stapler
Downloaded From ManualsPrinter.com Manuals
To Next Page
Loading...
