Lexmark W820 - Page 303

301
34 Wrong Paper
Size in Tray <x>
What this message means:
The printer was expecting to pick a different size paper from the specified tray than what it now
detects is moving through the paper path.
What you can do:
•
Press Go to clear the message and continue printing. The printer does not automatically
reprint the page that prompted the message.
• Verify that the Tray x Size setting in the Paper Menu matches the size paper loaded in the
tray.
• Make sure the tray paper guides are in the proper position for the size of the paper loaded.
• Make sure the paper is correctly oriented in the tray.
• Press Menu to open the Job Menu and cancel the current job.
See also:
Print media specifications; Loading the trays; Tray <x> Size;
Canceling a print job
35 Res Save Off
Deficient Memory
What this message means:
The printer lacks the memory needed to enable Resource Save. This message usually
indicates too much memory is allocated for one or more of the printer link buffers.
What you can do:
•
Press Go to disable Resource Save and continue printing.
• To enable Resource Save after you get this message:
– Make sure the link buffers are set to Auto, and exit the menus to activate the link buffer
changes.
– When Ready is displayed, enable Resource Save from the Setup Menu.
• Install additional memory.
Downloaded From ManualsPrinter.com Manuals