Lexmark W820 - Page 305

303
37 Insufficient
Memory
What this message means:
The printer cannot process print jobs or restore held jobs from the hard disk because printer memory is
full.
Note: The message 37 Insufficient Memory alternates with either
Held Jobs may be lost or Held Jobs May Not Be Restored .
What you can do:
If Held Jobs may be lost is the alternating message, you can:
• Press Go to clear the message and continue the current print job. The printer frees memory by
deleting the oldest held job and continues deleting held jobs until there is enough printer
memory to process the job.
• Press Stop to clear the message without deleting any held jobs. The current job may not print
correctly.
• Press Menu to open the Job Menu and cancel the current job.
If Held Jobs May Not Be Restored is the alternating message, you can press
Go to clear
the message.
To avoid this error in the future:
– Delete fonts, macros, and other data in printer memory.
– Install additional printer memory.
See also:
Using the Print and Hold function; Held Jobs may be lost; Held Jobs May Not Be
Restored
Downloaded From ManualsPrinter.com Manuals