Lexmark W820 - Page 83

81
If print media jams after it enters the printer from the multipurpose feeder:
1 Push up on the latch to release the duplex unit door (Door E).
2 Gently lower the door to the open position.
3 Pull up on handle to open the printer side door (Door A).
4 Pull the sheet straight out.
If the sheet is too short to grasp:
a Close the printer side door (Door A) and close the duplex unit door (Door E).
The printer automatically cycles, forcing the sheet to move forward.
b Open the duplex unit door (Door E) and the printer side door (Door A).
c Pull the sheet straight out.
5 Close the printer side door (Door A).
Downloaded From ManualsPrinter.com Manuals