134
3-2. Opening, closing and locking the doors
RX350_U_OM48E90U
The power back door settings can be changed on the multi-information display.
(P. 96)
The position at which the power back door will stop when opened automatically
can be changed.
When setting using the switch
Stop the power back door at the desired position. (P. 131, 133)
Press and hold the switch on
the lower part of the power back
door for 2 seconds.
• When setting is complete, a
buzzer will sound 4 times.
• The next time the power back
door is opened, it will stop at that
position.
When setting using the multi-information display
The open position can be set using the multi-information display. (P. 89)
When setting on the audio system screen
The open position can be set on the audio system screen. (P. 702)
Priority for the open position is given to the last position set using the
switch, multi-information display, or navigation system.
To return the adjusted open position to the default position (P. 138)
Changing the setting of the power back door system
Adjusting the open position of the power back door
1
2
To Next Page
Loading...
