629
8-2. Steps to take in an emergency
8
When trouble arises
RX350_U_OM48E90U
Take out the towing eyelet. (P. 647)
Remove the eyelet cover.
Insert the towing eyelet into the hole
and tighten partially by hand.
Tighten down the towing eyelet
securely using a wheel nut wrench
or hard metal bar.
Securely attach cables or chains to the towing eyelet.
Take care not to damage the vehicle body.
Enter the vehicle being towed and start the engine.
If the engine does not start, turn the engine switch to IGNITION ON mode.
Shift the shift lever to N and release the parking brake.
When the shift lever cannot be shifted: P. 660
Emergency towing procedure (vehicles with a towing eyelet)
1
To Next Page
Loading...
