Lexus rx350 2016 - Connecting a Bluetooth Audio Player; Connecting Method Is Set to “Device”; Connecting Method Is Set to “Vehicle”

442
5-7. Connecting Bluetooth
®
RX350_U_OM48E90U
When a registered Bluetooth
®
audio player is in standby for a connection, it will
automatically connect to the system when the engine switch is turned to
ACCESSORY or IGNITION ON mode.
When automatic connection priority is set to on and there is more than one reg-
istered Bluetooth
®
audio player available, the system will automatically connect
to the Bluetooth
®
audio player with the highest priority. (P. 445)
Operate the portable player and connect it to the Bluetooth
®
audio system.
Go to “Bluetooth
*
1
Setup”: “MENU” button  “Setup”  “Bluetooth*
1
”
Select the device to connect.
Select “Connect XX
*
2
” or “Connect as an Audio Player”.
If the desired Bluetooth
®
device is not displayed, register the device.
(P. 440)
*
1
: Bluetooth is a registered trademark of Bluetooth SIG, Inc.
*
2
: XX represents the selected device name.
Connecting a Bluetooth
®
audio player
There are 2 portable audio player connection settings available: connecting
from the vehicle and connecting from the portable player.
Connecting method is set to “Vehicle”
Connecting method is set to “Device”
1
2
3