327
4-5. Using the driving support systems
4
Driving
RX350_U_OM48E90U
To change the set speed, operate the lever until the desired set speed is obtained.
Increases the speed
Decreases the speed
Fine adjustment: Momentarily move
the lever in the desired direction.
Large adjustment: Hold the lever in the
desired direction.
The set speed will be increased or decreased as follows:
Fine adjustment: By approximately 1 mph (1.6 km/h)*
1
or 1 km/h (0.6 mph)*
2
each
time the lever is operated.
Large adjustment: The set speed can be increased or decreased continually until the
lever is released.
*
1
: When the set speed is shown in “MPH”
*
2
: When the set speed is shown in “km/h”
Pulling the lever toward you cancels
the constant speed control.
The speed setting is also canceled when
the brake pedal is depressed.
Pushing the lever up resumes the
constant speed control.
However, resuming is available when
the vehicle speed is more than approxi-
mately 25 mph (40 km/h).
Adjusting the set speed
1
2
Canceling and resuming the constant speed control
1
2
To Next Page
Loading...
